- Network signal: ART NET TCP IP - Number of signal channels: 8 DMX512 outputs and inputs - Working voltage: AC 100V~240V 47/60HZ - Features: - 1.Support RDM - 2.CPU uses advanced ARM Cortex-m4 - 3. Each output signal channel is independently photoelectrically isolated, and the isolated power supply is 2000V DC. - 4. Supports all ART NET network protocol consoles, such as Pearl Expert, Touch Tiger, MA, Fliggy, etc. - 5. Can convert regular DMX512 signals into ART NET network signals. - 6. The signal output XLR socket adopts the original Swiss NEUTRIK threepin socket (five-pin socket is optional) - 7. The device firmware can be upgraded through U disk or network - 8. System parameters can be set through the LCD screen or the network. - 9. Standard 1U 19-inch rack-mounted installation

- This multi-functional DMX processing amplifier has 8 outputs and two inputs. Each input has a three-core Cannon socket and a five-core Cannon socket. - The DMX processing amplifier has four operating modes. Three LEDs indicate which state is working. - Mode 1 (one input and eight output): eight outputs followed by the first DMX input - Mode 2 (one in and four out): The first input is assigned to output from 1 to 4. 2nd input distribution output to 5 to 8 - (Equivalent to two one-in-four-out amplifiers) - Mode 3 (one input and eight output): This mode defaults to the first output when there is a signal on the first input. - Automatically select and output the second signal when there is no signal on the first - Mode 4 (combining two input signals) M3 flashes - This mode compares two channels of data with the same address. Big output, small give up - Mode button cycle between mode 1 to 4 Mode 4 flashes for M3 led - The signal mode of the amplifier is switched on and off by the DMX output button. - Function is ON When a signal is input, a signal is output. When the input is absent, the output receives the last frame of data. - (No matter whether there is a signal or not, the corresponding output always has a signal output) - The function is closed. There is a signal corresponding to the input and a signal output. There is no signal at the input and no signal at the output. - The 8-bit LED on the back lights up or blinks to indicate that there is a signal output on the channel. Off means no signal is output from this channel. - The amplifier has two buttons, each of which changes the corresponding function, and records the current working state after 30 seconds without operating the button. - Mode button cycle between mode 1 to 4 Mode 4 flashes for M3 led

- Intel i5 4590 processor, 8GB memory, 120G SSD system hard drive - Real-time calculation, can control up to 4,096 control parameters simultaneously· - Comes with 8 DMX512 output ports - Built-in 1 7-inch TFT touch display - Can be customized to automatically turn on 220V power and automatically shut down after one minute delay when 220V power is disconnected - No manual operation is required, which facilitates the operation process of engineering equipment running back and forth in the machine room. - 2 fast power plugs cascaded to reduce excess power cords - Built-in 2 Gigabit Ethernet ports - 2 USB 2.0 connection interfaces - Standard 4U size can be installed in the cabinet

- Intel i5 4590 processor, 4Gb memory, Kingston 120G SSD· - Real-time calculation, can control up to 8192 control parameters at the same time· - Comes with 16 DMX512 output ports - 1 built-in 7-inch capacitive touch screen - With Built-in Ups - Can be customized 220V power on automatically turn on 220V power off delay one minute automatic shutdown - No manual operation is required, which facilitates the operation process of engineering equipment running back and forth in the machine room - Built-in 2-port Gigabit network switch - 2 USB 2.0 connection ports - 2 fast power plugs cascaded to reduce excessive power cords - Standard 4U size can be installed in the cabinet - Flight case: 65 * 21 * 54cm, Weight: 19Kg